• Fluke 771 Milliamp Process Clamp Meter, 4-20 mA

The Fluke 771 Milliamp Process Clamp Meter, 4-20 mA removes the need to lift a wire from a terminal (break the loop) to measure 4-20 mA, which has a direct impact on your maintenance time. With the 771, there is no need to call a control room to override the control of a process loop; it can save you time when testing analog I/O on a PLC if you do not need to check measurements on a console. In addition, the 771 can impact your overall cost by eliminating catastrophic plant outage caused by accidentally opening a critical loop.

Product Features:

  • Measure mA signals for PLC and control system analog I/O
  • Measure 4 to 20 mA output signals from transmitters without breaking loop
  • 0.2 % accuracy
  • Resolution and sensitivity to 0.01mA
  • Hold function captures and displays changing measurements
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50mA signals in older control systems using the 99.9mA range
  • Automatic power off after 15 minutes and 2 minute automatic off for backlight and spotlight

Write a review

Note: HTML is not translated!
    Bad           Good

Fluke 771 Milliamp Process Clamp Meter, 4-20 mA

  • Brand: Fluke
  • Product Code: 771
  • Availability: Pre-Order
  • Rp.12,000,000

Related Products

Tags: Milliamp Process Clamp Meter