The Hioki CM4141 True-RMS AC Clamp Meter
The Hioki CM4141 clamp on meter is a best-in-class measuring device incorporating Hioki's expertise in current sensing technology. The CM4141 is a 2000A AC True-RMS clamp meter that features a uniquely designed slim jaw that lets you easily get into the narrow gaps between cables in crowded electrical distribution boxes without fear of damaging the cables or the clamp meter. The broad -25° to 65° operating temperature range and IP50 dustproof and waterproof enclosure to enable professionals to work quickly in crowded electrical distribution panels. The high current measurement capability makes it especially useful for industrial applications.
Despite the ability to measure up to 2000A AC afforded by the large sensor with Φ55mm core diameter, the clamp meter's innovative jaw design lets you get between the narrow spaces between crowded cables with absolute ease. In addition, electrical panels are sometimes so crowded that you need to push and pull to the clamp to get it around the cable. The CM4141 features a robust construction that delivers strength while letting you weave through complex wiring to get to the right cable, vastly improving work efficiency and speed.
Get into the tightest gaps even with a large diameter clamp structure
Easily slide between narrow gaps with thin sensor. The large Φ55mm clamp lets you measure higher currents up to 2000 A AC, yet still provides the ability to easily get into narrow gaps. Improve work efficiency especially when circuit breakers and terminal boxes are located in confined spaces.
Compared with clamp meters of similar class, the meter weighs only 300g, at least 100g lighter than competitors, letting you use the instrument over long work days with significantly less effort and physical strain.
The improved design features stronger jaws (the current sensor portion of the instrument) and a dramatic boost in the duration of the warranty from 10,000 to 30,000 open-close cycles to ensure the instrument will provide even more years of reliable use. The CM4141 delivers the dual functionality of ease of clamping and resistance to damage.
-25˚C to + 65˚C
Thanks to an operating temperature range that has been expanded from the previous design (which could be used from 0°C to 40°C), the CM4000 Series can be used in freezing temperatures or on the hottest summer days.
CAT IV 600 V
The CM4141 can safely measure service wires with a wire-to-ground voltage of up to 600 V as well as wires found in distribution panels. The clamp meter features a safe design that can withstand a transient overvoltage of 8 kV in case of a lightning strike.
The clamp meters beep when the measured value stabilizes and then automatically hold the display value. This is useful when using the instrument in locations where it is difficult to see the display or press the hold button.
Assess fluctuating current values
The ability to identify the maximum, minimum, average, and crest maximum and minimum values for equipment like machine tools whose load current fluctuates is useful in preventive maintenance and quality control.
The CM4141 can simultaneously measure inrush current in RMS as well as maximum crest values at motor startup and for welding currents.
The clamp meter automatically detects the duration of the inrush current (which can range from several dozen milliseconds to several hundred milliseconds) and measures the current during that interval, enabling it to yield more accurate measurements than standard clamp-on meters whose measurement interval is fixed to 100 ms.
Accurate testing assured
Current waveforms are often distorted, causing the average-value and true RMS measurement methods to yield different results. To obtain accurate readings, RMS measurement is indispensable.
Cutting the harmonic component serves to stabilize values, an approach that is useful when measuring the secondary side of a switching power supply or inverter.
- Easily get into tight spaces between cables thanks to thin sensor with a minimum cross-section span of 11 mm
- Measure up to 2000 A AC
- AC A, AC and DC V, DC+AC V, resistance, frequency, temperature
- Expanded -25 °C to 65 °C operating temperature range
- Continuity check
- Diode check
- Automatic AC/DC detection (Voltage check only)
- Max/ Min/ AVG/ Peak waveform MAX/ Peak waveform MIN value display
- Low-pass filter function
- Display value hold
- Auto power save
- Buzzer sound
1 - Test Lead L9207-10
1 - Carrying Case C0203
2 - LR03 Alkaline battery
1 - Instruction Manual
1 - Usage notes
Hioki CM4141 True-RMS AC Clamp Meter, 2000A AC with Innovative Current Sensor Design
- Brand: Hioki
- Product Code: CM4141
- Availability: Pre-Order
Tags: True-RMS AC Clamp Meter