• PCE-5000 UCI Hardness Tester

PCE-5000 UCI Hardness Tester Uses the ASTM A1038 ultrasonic contact impedance (UCI) method for metal and alloy hardness testing

PCE-5000 is a portable hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Ultrasonic hardness testing is considered nondestructive, as it creates a microscopic indentation only visible when using a high-powered microscope.

Featuring a quick 2-second measurement time, this UCI hardness tester is the ideal tool for weld inspection, hardness control of metal coatings and hardness measurement of fine-grained metals, small forgings, cast materials, heat-affected zones, ion-nitrided stamping dies and molds, forms, presses, thin-walled structures and parts, bearings, tooth flanks, pipes, tanks, steel sheets and products with intricate or complex shapes.

Additional measuring sensors can be connected to the ultrasonic meter, which vary in their test force, which is applied to measure the hardness. The different sensors measure the hardness of the objects depending on the roughness of their surface. For example, the standard sensor with 20 N measures surfaces with a roughness of less than 5 µm. The 10 N sensor measures a roughness of less than 3.2 µm and the one with 98 N measures a roughness of less than 15 µm.

- Measures the hardness of metals and alloys with a minimum thickness of 2 mm

- Displays measurements in Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units

- Measuring range: 61 … 85.6 HRA, 41 … 100 HRB, 20.3 … 68 HRC, 85 … 650 HB, 50 … 999 HV, 255 … 2180 MPa (N/mm²)

- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV

- Stores up to 2000 measurement groups / 20 calibration sets to memory

- Provides measurements in just 2 seconds

- Probe fits into small spaces and hard-to-reach places

- Features a large and easy-to-read LCD screen, simple calibration and an RS-232 interface

Write a review

Note: HTML is not translated!
    Bad           Good

PCE-5000 UCI Hardness Tester

  • Rp.138,000,000


Related Products

PCE-2900 Hardness Tester

PCE-2900 Hardness Tester

..

Rp.42,000,000

PCE-2500N Hardness Tester for Metals
PCE-2550 Hardness Tester

PCE-2550 Hardness Tester

..

Rp.23,000,000

PCE-1000N Barcol Hardness Tester
PCE-HT 225E Hardness Tester
PCE-3000U Hardness Tester

PCE-3000U Hardness Tester

..

Rp.51,000,000

PCE-RGB2 Colorimeter

PCE-RGB2 Colorimeter

..

Rp.19,400,000

PCE-CSM 2 Colorimeter

PCE-CSM 2 Colorimeter

..

Rp.36,000,000

PCE-423 Air Flow Meter

PCE-423 Air Flow Meter

..

Rp.6,400,000

Tags: Hardness Tester